Rsnapshot Konfiguration - Netcomplete GmbH

/opt/local/etc/rsnapshot.conf

#################################################
# rsnapshot.conf - rsnapshot configuration file #
#################################################
#                                               #
# PLEASE BE AWARE OF THE FOLLOWING RULE:        #
#                                               #
# This file requires tabs between elements      #
#                                               #
#################################################

#######################
# CONFIG FILE VERSION #
#######################

config_version	1.2

###########################
# SNAPSHOT ROOT DIRECTORY #
###########################

# All snapshots will be stored under this root directory.
#
snapshot_root	/Volumes/Raid_Backup/backups

# If no_create_root is enabled, rsnapshot will not automatically create the
# snapshot_root directory. This is particularly useful if you are backing
# up to removable media, such as a FireWire or USB drive.
#
#no_create_root	1

#################################
# EXTERNAL PROGRAM DEPENDENCIES #
#################################

# LINUX USERS:   Be sure to uncomment "cmd_cp". This gives you extra features.
# EVERYONE ELSE: Leave "cmd_cp" commented out for compatibility.
#
# See the README file or the man page for more details.
#
#cmd_cp		/bin/cp

# uncomment this to use the rm program instead of the built-in perl routine.
#
cmd_rm		/bin/rm

# rsync must be enabled for anything to work. This is the only command that
# must be enabled.
#
cmd_rsync	/opt/local/bin/rsync

# Uncomment this to enable remote ssh backups over rsync.
#
cmd_ssh	/usr/bin/ssh


# Comment this out to disable syslog support.
#
cmd_logger	/usr/bin/logger

# Uncomment this to specify the path to "du" for disk usage checks.
# If you have an older version of "du", you may also want to check the
# "du_args" parameter below.
#
#cmd_du		/usr/bin/du

# Uncomment this to specify the path to rsnapshot-diff.
#
#cmd_rsnapshot_diff	/usr/local/bin/rsnapshot-diff

# Specify the path to a script (and any optional arguments) to run right
# before rsnapshot syncs files
#
#cmd_preexec	/path/to/preexec/script

# Specify the path to a script (and any optional arguments) to run right
# after rsnapshot syncs files
#
#cmd_postexec	/path/to/postexec/script

# Paths to lvcreate, lvremove, mount and umount commands, for use with
# Linux LVMs.
#
#linux_lvm_cmd_lvcreate	/path/to/lvcreate
#linux_lvm_cmd_lvremove	/path/to/lvremove
#linux_lvm_cmd_mount	/sbin/mount
#linux_lvm_cmd_umount	/sbin/umount

#########################################
#     BACKUP LEVELS / INTERVALS         #
# Must be unique and in ascending order #
# e.g. alpha, beta, gamma, etc.         #
#########################################

#retain	alpha	6
retain	daily	7
retain	weekly	4
retain	monthly	3

############################################
#              GLOBAL OPTIONS              #
# All are optional, with sensible defaults #
############################################

# Verbose level, 1 through 5.
# 1     Quiet           Print fatal errors only
# 2     Default         Print errors and warnings only
# 3     Verbose         Show equivalent shell commands being executed
# 4     Extra Verbose   Show extra verbose information
# 5     Debug mode      Everything
#
verbose		2

# Same as "verbose" above, but controls the amount of data sent to the
# logfile, if one is being used. The default is 3.
#
loglevel	3

# If you enable this, data will be written to the file you specify. The
# amount of data written is controlled by the "loglevel" parameter.
#
#logfile	/var/log/rsnapshot

# If enabled, rsnapshot will write a lockfile to prevent two instances
# from running simultaneously (and messing up the snapshot_root).
# If you enable this, make sure the lockfile directory is not world
# writable. Otherwise anyone can prevent the program from running.
#
lockfile	/var/run/rsnapshot.pid

# Default rsync args. All rsync commands have at least these options set.
#
#rsync_short_args	-a
#rsync_long_args	--delete --numeric-ids --relative --delete-excluded
rsync_long_args	--archive --acls --delete --numeric-ids --relative --delete-excluded --xattrs --crtimes --protect-args --human-readable --rsync-path=/opt/local/bin/rsync


# ssh has no args passed by default, but you can specify some here.
#
#ssh_args	-p 22

# Default arguments for the "du" program (for disk space reporting).
# The GNU version of "du" is preferred. See the man page for more details.
# If your version of "du" doesn't support the -h flag, try -k flag instead.
#
#du_args	-csh

# If this is enabled, rsync won't span filesystem partitions within a
# backup point. This essentially passes the -x option to rsync.
# The default is 0 (off).
#
#one_fs		0

# The include and exclude parameters, if enabled, simply get passed directly
# to rsync. If you have multiple include/exclude patterns, put each one on a
# separate line. Please look up the --include and --exclude options in the
# rsync man page for more details on how to specify file name patterns. 
# 
#include	???
#include	???
#exclude	???
#exclude	???
exclude	.Spotlight-*/
exclude	.Trashes
exclude	/afs/*
exclude	/automount/*
exclude	/cores/*
exclude	/dev/*
exclude	/Network/*
exclude	/private/tmp/*
exclude	/private/var/run/*
exclude	/private/var/spool/postfix/*
exclude	/private/var/vm/*
exclude	/Previous Systems.localized
exclude	/tmp/*
exclude	/Volumes/*
exclude	*/.Trash


# The include_file and exclude_file parameters, if enabled, simply get
# passed directly to rsync. Please look up the --include-from and
# --exclude-from options in the rsync man page for more details.
#
#include_file	/path/to/include/file
#exclude_file	/path/to/exclude/file

# If your version of rsync supports --link-dest, consider enabling this.
# This is the best way to support special files (FIFOs, etc) cross-platform.
# The default is 0 (off).
#
#link_dest	0

# When sync_first is enabled, it changes the default behaviour of rsnapshot.
# Normally, when rsnapshot is called with its lowest interval
# (i.e.: "rsnapshot alpha"), it will sync files AND rotate the lowest
# intervals. With sync_first enabled, "rsnapshot sync" handles the file sync,
# and all interval calls simply rotate files. See the man page for more
# details. The default is 0 (off).
#
#sync_first	0

# If enabled, rsnapshot will move the oldest directory for each interval
# to [interval_name].delete, then it will remove the lockfile and delete
# that directory just before it exits. The default is 0 (off).
#
#use_lazy_deletes	0

# Number of rsync re-tries. If you experience any network problems or
# network card issues that tend to cause ssh to fail with errors like
# "Corrupted MAC on input", for example, set this to a non-zero value
# to have the rsync operation re-tried.
#
#rsync_numtries 0

# LVM parameters. Used to backup with creating lvm snapshot before backup
# and removing it after. This should ensure consistency of data in some special
# cases
#
# LVM snapshot(s) size (lvcreate --size option).
#
#linux_lvm_snapshotsize	100M

# Name to be used when creating the LVM logical volume snapshot(s).
#
#linux_lvm_snapshotname	rsnapshot

# Path to the LVM Volume Groups.
#
#linux_lvm_vgpath	/dev

# Mount point to use to temporarily mount the snapshot(s).
#
#linux_lvm_mountpath	/path/to/mount/lvm/snapshot/during/backup

###############################
### BACKUP POINTS / SCRIPTS ###
###############################

# LOCALHOST
#backup	/home/		localhost/
#backup	/etc/		localhost/
#backup	/usr/local/	localhost/
#backup	/var/log/rsnapshot		localhost/
#backup	/etc/passwd	localhost/
#backup	/home/foo/My Documents/		localhost/
#backup	/foo/bar/	localhost/	one_fs=1, rsync_short_args=-urltvpog
#backup_script	/usr/local/bin/backup_pgsql.sh	localhost/postgres/
# You must set linux_lvm_* parameters below before using lvm snapshots
#backup	lvm://vg0/xen-home/	lvm-vg0/xen-home/

# EXAMPLE.COM
#backup_exec	/bin/date "+ backup of example.com started at %c"
#backup	root@example.com:/home/	example.com/	+rsync_long_args=--bwlimit=16,exclude=core
#backup	root@example.com:/etc/	example.com/	exclude=mtab,exclude=core
#backup_exec	ssh root@example.com "mysqldump -A > /var/db/dump/mysql.sql"
#backup	root@example.com:/var/db/dump/	example.com/
#backup_exec	/bin/date "+ backup of example.com ended at %c"

# mam.typographie.ch
backup	root@mam.typographie.ch:/Volumes/Raid1_Daten/	mam.typographie.ch/
backup	root@mam.typographie.ch:/Volumes/vol00/	mam.typographie.ch/

# CVS.SOURCEFORGE.NET
#backup_script	/usr/local/bin/backup_rsnapshot_cvsroot.sh	rsnapshot.cvs.sourceforge.net/

# RSYNC.SAMBA.ORG
#backup	rsync://rsync.samba.org/rsyncftp/	rsync.samba.org/rsyncftp/

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

#################################################

# rsnapshot.conf - rsnapshot configuration file #

#################################################

# #

# PLEASE BE AWARE OF THE FOLLOWING RULE: #

# #

# This file requires tabs between elements #

# #

#################################################

#######################

# CONFIG FILE VERSION #

#######################

config_version 1.2

###########################

# SNAPSHOT ROOT DIRECTORY #

###########################

# All snapshots will be stored under this root directory.

snapshot_root /Volumes/Raid_Backup/backups

# If no_create_root is enabled, rsnapshot will not automatically create the

# snapshot_root directory. This is particularly useful if you are backing

# up to removable media, such as a FireWire or USB drive.

#no_create_root 1

#################################

# EXTERNAL PROGRAM DEPENDENCIES #

#################################

# LINUX USERS: Be sure to uncomment "cmd_cp". This gives you extra features.

# EVERYONE ELSE: Leave "cmd_cp" commented out for compatibility.

# See the README file or the man page for more details.

#cmd_cp /bin/cp

# uncomment this to use the rm program instead of the built-in perl routine.

cmd_rm /bin/rm

# rsync must be enabled for anything to work. This is the only command that

# must be enabled.

cmd_rsync /opt/local/bin/rsync

# Uncomment this to enable remote ssh backups over rsync.

cmd_ssh /usr/bin/ssh

# Comment this out to disable syslog support.

cmd_logger /usr/bin/logger

# Uncomment this to specify the path to "du" for disk usage checks.

# If you have an older version of "du", you may also want to check the

# "du_args" parameter below.

#cmd_du /usr/bin/du

# Uncomment this to specify the path to rsnapshot-diff.

#cmd_rsnapshot_diff /usr/local/bin/rsnapshot-diff

# Specify the path to a script (and any optional arguments) to run right

# before rsnapshot syncs files

#cmd_preexec /path/to/preexec/script

# Specify the path to a script (and any optional arguments) to run right

# after rsnapshot syncs files

#cmd_postexec /path/to/postexec/script

# Paths to lvcreate, lvremove, mount and umount commands, for use with

# Linux LVMs.

#linux_lvm_cmd_lvcreate /path/to/lvcreate

#linux_lvm_cmd_lvremove /path/to/lvremove

#linux_lvm_cmd_mount /sbin/mount

#linux_lvm_cmd_umount /sbin/umount

#########################################

# BACKUP LEVELS / INTERVALS #

# Must be unique and in ascending order #

# e.g. alpha, beta, gamma, etc. #

#########################################

#retain alpha 6

retain daily 7

retain weekly 4

retain monthly 3

############################################

# GLOBAL OPTIONS #

# All are optional, with sensible defaults #

############################################

# Verbose level, 1 through 5.

# 1 Quiet Print fatal errors only

# 2 Default Print errors and warnings only

# 3 Verbose Show equivalent shell commands being executed

# 4 Extra Verbose Show extra verbose information

# 5 Debug mode Everything

verbose 2

# Same as "verbose" above, but controls the amount of data sent to the

# logfile, if one is being used. The default is 3.

loglevel 3

# If you enable this, data will be written to the file you specify. The

# amount of data written is controlled by the "loglevel" parameter.

#logfile /var/log/rsnapshot

# If enabled, rsnapshot will write a lockfile to prevent two instances

# from running simultaneously (and messing up the snapshot_root).

# If you enable this, make sure the lockfile directory is not world

# writable. Otherwise anyone can prevent the program from running.

lockfile /var/run/rsnapshot.pid

# Default rsync args. All rsync commands have at least these options set.

#rsync_short_args -a

#rsync_long_args --delete --numeric-ids --relative --delete-excluded

rsync_long_args --archive --acls --delete --numeric-ids --relative --delete-excluded --xattrs --crtimes --protect-args --human-readable --rsync-path=/opt/local/bin/rsync

# ssh has no args passed by default, but you can specify some here.

#ssh_args -p 22

# Default arguments for the "du" program (for disk space reporting).

# The GNU version of "du" is preferred. See the man page for more details.

# If your version of "du" doesn't support the -h flag, try -k flag instead.

#du_args -csh

# If this is enabled, rsync won't span filesystem partitions within a

# backup point. This essentially passes the -x option to rsync.

# The default is 0 (off).

#one_fs 0

# The include and exclude parameters, if enabled, simply get passed directly

# to rsync. If you have multiple include/exclude patterns, put each one on a

# separate line. Please look up the --include and --exclude options in the

# rsync man page for more details on how to specify file name patterns.

#include ???

#exclude ???

exclude .Spotlight-*/

exclude .Trashes

exclude /afs/*

exclude /automount/*

exclude /cores/*

exclude /dev/*

exclude /Network/*

exclude /private/tmp/*

exclude /private/var/run/*

exclude /private/var/spool/postfix/*

exclude /private/var/vm/*

exclude /Previous Systems.localized

exclude /tmp/*

exclude /Volumes/*

exclude */.Trash

# The include_file and exclude_file parameters, if enabled, simply get

# passed directly to rsync. Please look up the --include-from and

# --exclude-from options in the rsync man page for more details.

#include_file /path/to/include/file

#exclude_file /path/to/exclude/file

# If your version of rsync supports --link-dest, consider enabling this.

# This is the best way to support special files (FIFOs, etc) cross-platform.

# The default is 0 (off).

#link_dest 0

# When sync_first is enabled, it changes the default behaviour of rsnapshot.

# Normally, when rsnapshot is called with its lowest interval

# (i.e.: "rsnapshot alpha"), it will sync files AND rotate the lowest

# intervals. With sync_first enabled, "rsnapshot sync" handles the file sync,

# and all interval calls simply rotate files. See the man page for more

# details. The default is 0 (off).

#sync_first 0

# If enabled, rsnapshot will move the oldest directory for each interval

# to [interval_name].delete, then it will remove the lockfile and delete

# that directory just before it exits. The default is 0 (off).

#use_lazy_deletes 0

# Number of rsync re-tries. If you experience any network problems or

# network card issues that tend to cause ssh to fail with errors like

# "Corrupted MAC on input", for example, set this to a non-zero value

# to have the rsync operation re-tried.

#rsync_numtries 0

# LVM parameters. Used to backup with creating lvm snapshot before backup

# and removing it after. This should ensure consistency of data in some special

# cases

# LVM snapshot(s) size (lvcreate --size option).

#linux_lvm_snapshotsize 100M

# Name to be used when creating the LVM logical volume snapshot(s).

#linux_lvm_snapshotname rsnapshot

# Path to the LVM Volume Groups.

#linux_lvm_vgpath /dev

# Mount point to use to temporarily mount the snapshot(s).

#linux_lvm_mountpath /path/to/mount/lvm/snapshot/during/backup

###############################

### BACKUP POINTS / SCRIPTS ###

###############################

# LOCALHOST

#backup /home/ localhost/

#backup /etc/ localhost/

#backup /usr/local/ localhost/

#backup /var/log/rsnapshot localhost/

#backup /etc/passwd localhost/

#backup /home/foo/My Documents/ localhost/

#backup /foo/bar/ localhost/ one_fs=1, rsync_short_args=-urltvpog

#backup_script /usr/local/bin/backup_pgsql.sh localhost/postgres/

# You must set linux_lvm_* parameters below before using lvm snapshots

#backup lvm://vg0/xen-home/ lvm-vg0/xen-home/

# EXAMPLE.COM

#backup_exec /bin/date "+ backup of example.com started at %c"

#backup root@example.com:/home/ example.com/ +rsync_long_args=--bwlimit=16,exclude=core

#backup root@example.com:/etc/ example.com/ exclude=mtab,exclude=core

#backup_exec ssh root@example.com "mysqldump -A > /var/db/dump/mysql.sql"

#backup root@example.com:/var/db/dump/ example.com/

#backup_exec /bin/date "+ backup of example.com ended at %c"

# mam.typographie.ch

backup root@mam.typographie.ch:/Volumes/Raid1_Daten/ mam.typographie.ch/

backup root@mam.typographie.ch:/Volumes/vol00/ mam.typographie.ch/

# CVS.SOURCEFORGE.NET

#backup_script /usr/local/bin/backup_rsnapshot_cvsroot.sh rsnapshot.cvs.sourceforge.net/

# RSYNC.SAMBA.ORG

#backup rsync://rsync.samba.org/rsyncftp/ rsync.samba.org/rsyncftp/

/Library/LaunchDaemons/org.rsnapshot.periodic-daily.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Label</key>
	<string>org.rsapshot.periodic-daily</string>
	<key>LowPriorityIO</key>
	<true/>
	<key>Nice</key>
	<integer>1</integer>
	<key>ProgramArguments</key>
	<array>
		<string>/opt/local/bin/rsnapshot</string>
		<string>daily</string>
	</array>
	<key>StartCalendarInterval</key>
	<dict>
		<key>Hour</key>
		<integer>3</integer>
		<key>Minute</key>
		<integer>50</integer>
	</dict>
</dict>
</plist>

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>org.rsapshot.periodic-daily</string>

<key>LowPriorityIO</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/opt/local/bin/rsnapshot</string>

<string>daily</string>

</array>

<key>StartCalendarInterval</key>

<dict>

<key>Minute</key>

</dict>

</plist>

/Library/LaunchDaemons/org.rsnapshot.periodic-weekly.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Label</key>
	<string>org.rsapshot.periodic-weekly</string>
	<key>LowPriorityIO</key>
	<true/>
	<key>Nice</key>
	<integer>1</integer>
	<key>ProgramArguments</key>
	<array>
		<string>/opt/local/bin/rsnapshot</string>
		<string>weekly</string>
	</array>
	<key>StartCalendarInterval</key>
	<dict>
		<key>Hour</key>
		<integer>3</integer>
		<key>Minute</key>
		<integer>40</integer>
		<key>Weekday</key>
		<integer>0</integer>
	</dict>
</dict>
</plist>

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>org.rsapshot.periodic-weekly</string>

<key>LowPriorityIO</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/opt/local/bin/rsnapshot</string>

<string>weekly</string>

</array>

<key>StartCalendarInterval</key>

<dict>

<key>Minute</key>

<key>Weekday</key>

</dict>

</plist>

/Library/LaunchDaemons/org.rsnapshot.periodic-monthly.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Label</key>
	<string>org.rsapshot.periodic-monthly</string>
	<key>LowPriorityIO</key>
	<true/>
	<key>Nice</key>
	<integer>1</integer>
	<key>ProgramArguments</key>
	<array>
		<string>/opt/local/bin/rsnapshot</string>
		<string>monthly</string>
	</array>
	<key>StartCalendarInterval</key>
	<dict>
		<key>Day</key>
		<integer>1</integer>
		<key>Hour</key>
		<integer>3</integer>
		<key>Minute</key>
		<integer>30</integer>
	</dict>
</dict>
</plist>

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>org.rsapshot.periodic-monthly</string>

<key>LowPriorityIO</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/opt/local/bin/rsnapshot</string>

<string>monthly</string>

</array>

<key>StartCalendarInterval</key>

<dict>

<key>Minute</key>

</dict>

</plist>

16. Februar 2016 2684 webadmin OS X Server Apple , Command-line

Total 0 Votes:

Tell us how can we improve this post?

Captcha: + = Verify Human or Spambot ?

Add A Knowledge Base Question !

Question Title:

Category:

Captcha: + = Verify Human or Spambot ?

/opt/local/etc/rsnapshot.conf

/Library/LaunchDaemons/org.rsnapshot.periodic-daily.plist

/Library/LaunchDaemons/org.rsnapshot.periodic-weekly.plist

/Library/LaunchDaemons/org.rsnapshot.periodic-monthly.plist

Tell us how can we improve this post?

Related Knowledge Base Posts -

Add A Knowledge Base Question !

Login

Don't need to reset? Login

Forgot Password?

Add A Knowledge Base Question !